Edwards RV8 6.9 cfm 2-Stage Vacuum Pump with Fittings Vacuum Chamber Purging Oven

  
KF25 flexible stainless steel bellow (3.3 ft), clamps and centering rings set. Edwards RV pumps have become the industry standard for scientific primary pumping applications. RV pumps are uniquely capable of delivering high or low throughput with high ultimate vacuum. This, combined with ultra-low noise levels, makes them ideal for a wide range of applications including GCMS and other small bench top type applications. All pumps are approved to UL and CSA standards by an external test house. Edwards has a global network, providing world-wide support for product applications and service. Supplied with: 1 litre of Ultragrade 19 oil, inlet filter and O-ring. All our RV pumps are significantly quieter noise levels of 48 dBA 50Hz are typically half the noise of a conventional pump and have been achieved by extensive work on the drive train and motor. The pumps have the unique ability to deliver excellent ultimate vacuum in both high vacuum and high throughput modes with or without gas ballast. This gives the user an unrivalled opportunity to select the optimum pumping performance without compromising the application. In its high vacuum mode, the RV pump is ideal for analytically instruments, electron microscopes, physics research, backing turbo pumps, TV tube pumping and leak detection applications. Configure the same pump in the high throughput mode, and it becomes suitable for mass spectrometer inlet systems, distillation, laboratory furnaces, backing vapor pumps, solvent concentration, freeze drying and other drying applications.

The simple to use mode selector and accessible, three-position gas ballast control allow the pump to be reconfigured at any time, even when the pump is running. 48 dB(A) and intrusive frequencies minimised. Suitable for high throughput and high vacuum applications.

Fast acting inlet valve for system protection. High torque, dual voltage/dual frequency motor, electronic start relay. Oil-tight with printed gaskets, effective shaft seals. Oil box well contains filling spills. Hi-tech polymer blades, large diameter, easy-clean oil passages. Consistent, built-in quality, cast bar construction.

Degassing/curing - oil, epoxy resin. Load locks and transfer chambers. Scanning electron microscopes - SEM.

110V 50/60Hz 1-PH 5A or 220V 50/60Hz 1-PH 2.1A switchable. US standard 3-prong plug (NEMA 5-15P).

6.9 CFM at 60Hz. Ultimate vacuum without gas ballast. Ultimate vacuum with gas ballast. 18.5 x 6.2 x 8.9.

31 x 11.5 x 19. Max water vapor inlet pressure. 28.5 torr (38 mbar).

Max allowed pressure at outlet. 0.2 bar gauge/2.8 psig.

54°F to 104°F (12°C to 40°C). Minimum 0.48 quart (0.45 L), maximum 0.8 quart (0.75 L). Nominal rotation speed at 50/60Hz. Edwards RV8 6.9 CFM dual stage vacuum pump. EMF10 exhaust filter (optional, NOT included). KF25 stainless steel bellow (3 ft). 110V standrd 3-prong US power cord. Edwards ultra grade 19 vacuum pump oil. User's manual in a CD.

The item "Edwards RV8 6.9 cfm 2-Stage Vacuum Pump with Fittings Vacuum Chamber Purging Oven" is in sale since Monday, November 8, 2010. This item is in the category "Business & Industrial\CNC, Metalworking & Manufacturing\Welding & Soldering Equipment\Welding Equipment & Accessories\Welders, Cutters & Torches\MIG Guns & Torches".

The seller is "acrossintl" and is located in Livingston, New Jersey. This item can be shipped worldwide.

1. Country/Region of Manufacture: United Kingdom
2. MPN: Edwards Vacuum Pump
3. Brand: Edwards
4. Model: RV8