5Gallon Stainless Degassing Chamber Kit +1/4HP 3CFM Vacuum Pump Hose CE/FDA

  

Note: Lubricating oil must be added before running the machine. It is strictly forbidden to run the pump without Lubricating oil. Heavy duty vacuum chamber is perfect for removing gases from. Compounds which have become entrapped in the mixture when mixing.

Vacuum chambers are required to assure a bubble-free. Mold when mixing resin and silicone rubbers and slower setting. Our vacuum chamber greatly reduces gas bubbles and.

Pockets that would weaken the epoxy or silicone. Allows for you to see air being vacuumed out of your resin mix. Built-in valve and gauge provides ease of use and convenience.

Glycerin filled industrial gauge resists vibrations and keeps. The gauge accurate to within 0.5inHg. Perfect for degassing silicone, epoxy resin, solvents and more! 1/4HP 3CFM Single Stage Vacuum. High Efficiency & Low Noise.

Direct Drive Motor Allowing Easy Starting and is Maintenance Free. Oil Sight Glass for Monitoring Oil Levels. With Oil Drain Plug Positioned at Bottom of Oil Reservoir. Internal High Volume Cooling Fan for Extended Use. Exhaust Port with Exhaust Cap.

5 Gallons (21 Liter) Chamber. Heat cured silicone gasket is chemically resistant to solvents.

Like butane and does not loose vacuum over time. Heavy duty 3/4 shatter resistant acrylic crystal lid allows. You to see inside and bulletproof. Hydro-tested stainless steel container is high strength, very.

Durable and withstands up to 160. 5.5 foot collapse-proof steel wire reinforced hose easily.

Withstands any vacuum pressure you throw at it and features. Both the release valve and ball valve are built into a single. Unit for ease of use. Durable brass fittings fit all vacuum pump ports. 8.50 micron air filter reduces air flow back into the chamber. For purging and prevents dust and debris from entering the.

9.4.75" x 4.75" non stick silicone pad allows you to easily. Max vacuum rated to 29.9inHg at sea level. Our vaccum chamber pairs perfectly with single or dual stage.

3 to 9 CFM pumps. Perfect for applications like degassing urethane, silicones. Epoxies, stabilize wood, extracting essential oils from organic. Motor Power:110V 1/4HP, 3CFM, 220V 1/4HP, 2.5CFM.

11.2"11.2"/28cm28cm (Without Lid). 1Heat Treated Silicone Lid Gasket. 1Glycerin Filled Gauge with Brass Fittings. 15 Foot Steel Wire Collapse-Proof Hose.

11/4HP 3CFM Single Stage Vacuum Pump. Statement:The sale of this item may be subject to regulation by the U. Food and Drug Administration and state and local regulatory agencies. The Fingertip Pulse Oximeter is certified with the US FDA 510K No.

K070371, the CE & TUV of Europe and it is on the Australian Register of Therapeutic Goods (ARTG) with the code 136606. The Powered Surgical Instrument / Speed 808 System is certified with the US FDA 510(k) Number:K132989. The Powered Surgical Instrument / Hair Remove Device is certified with the US FDA 510(k) Number:K180353. The Powered Surgical Instrument / Hair Remove System is certified with the US FDA 510(k) Number:K141973. Massager, vacuum, light induced heating / Slimming Treatment Device is certified with the US FDA 510(k) Number:K161892. This item is in the category "Business & Industrial\Hydraulics, Pneumatics, Pumps & Plumbing\Pumps & Pump Accessories\Vacuum Pumps\Other Vacuum Pumps". The seller is "businessnessshop68" and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Czech Republic, Hungary, Australia, Greece, Portugal, Sweden, Belgium, France, Ireland, Netherlands, Poland, Spain, Italy, Germany, Israel, Mexico, New Zealand, Switzerland, Republic of Croatia.

1. Brand: Unbranded
2. Voltage: 110V/220V
3. Motor power: 110V 1/3HP, 3CFM , 220V 1/4HP, 2.5CFM
4. Oil Capacity: 250ml
5. Pump Speed: 1720 RPM
6. Micro Rating: 75 Microns (10pa)
7. Maximum Rated Vacuum: 29.9inHg @ sea level / 24.82 @ 5000ft
8. Hose Connector: 1/4\
9. Chamber Max Temp: 160ºF
10. Gauge Style: Gylcerin Filled
11. Chamber Dimension: 10-7/8\
12. Overall Dimension: 11-5/8\